a company called deatschwerks injectors is now making dropin injectors for the s2000 style injector. blackbird/busa
I bought some 450cc's for 300 bucks for my turbo bird. They fit right in. Just solder the new clips that come with them.
I turned my fpr down to 30 at idle from 50psi, and left the map alone. At 15 lbs boost i was running 80psi and +50 in the pc3. This gave a/f of about 12 to 1.
I get 12 to 1 now at 38 psi fuel pressure.
so now that i know they work, and fit and flow as advertised, i will attempt to get the fuel pressure up around 70 or so to get the map near zero.
The flow chart that came with my set showed .2 percent match at 100 duty cycle, and .4 percent at about 70 percent duty cycle.
they also come with a chart that shows what they flow at different bar's. very handy.
just thought you might like to know that someone is finally making dropin injectors for these bikes.
I bought some 450cc's for 300 bucks for my turbo bird. They fit right in. Just solder the new clips that come with them.
I turned my fpr down to 30 at idle from 50psi, and left the map alone. At 15 lbs boost i was running 80psi and +50 in the pc3. This gave a/f of about 12 to 1.
I get 12 to 1 now at 38 psi fuel pressure.
so now that i know they work, and fit and flow as advertised, i will attempt to get the fuel pressure up around 70 or so to get the map near zero.
The flow chart that came with my set showed .2 percent match at 100 duty cycle, and .4 percent at about 70 percent duty cycle.
they also come with a chart that shows what they flow at different bar's. very handy.
just thought you might like to know that someone is finally making dropin injectors for these bikes.
