hi im looking to use a bigger air filter than the stock k+n that fits inside body panels hahn 16g inlet is 2 1/4 inch most after market one are 3inch any one
using something bigger looking to go through panels but not to big --thanx gregg
16g air filter
| Author | Comment | ||
|---|---|---|---|
 gjitsu |
16g air filter |
Lead | |
|
Posts: 11 (10/07/08 06:50:47) |
|
||
|
Gary Evans |
|||
|
Posts: 2296 (10/07/08 09:08:47) |
I use the K&N RU-2780 which has a 2 7/16 flange, is 3 3/4 x 4 1/2 on the large end and 2 3/4 long.
The same filter in a 5 inch length is RU-1180. |
||
|
gjitsu |
|||
|
Posts: 12 (10/07/08 15:32:28) |
thanx gary
|
||
|
XX4me |
|||
|
Posts: 266 (05/08/09 06:22:04) |
You can contact K&N and have a custom filter made too.
They have a "custom shop" of sorts. Basically they will combine different filter bases and elements to fit your need. I had them make me one with a wide base small top with an offset flange. The wide base gave me more filter area, the narrow top made it more conical, the offset flange moved it further up the body work to prevent dragging. If I remember right it was about 60-70 bucks. |
||
|
Gary Evans |
|||
|
Posts: 2347 (05/09/09 04:08:10) |
Thats good to know. Never heard of their custom shop.
|
||
