TD05H, Is this a good choice? - General - TURBOCHARGING - Welcome - Sponsored by Gary Evans - Message Board - Yuku

RSS
Email

0 Kudo

<< Previous Topic Next Topic >>

TD05H, Is this a good choice?

Author	Comment
hornog2	TD05H, Is this a good choice?	Lead	[-]
Posts: 1 (05/29/08 04:26:54) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Tags : None Gary, I am dead keen on throwing myself into the deep end and building up my own turbo kit for my 03 Hayabusa. Iwill be running it only on the 1/4 mile slightly lengthened.. At this stage I want to run stock internals and I believe that I can run up to about 300hp like that with a cylinder spacer. Would a TD05H 46mm comp wheel .60 comp cover .63t housing be suitable for the job? I am new to turbos and am researching as much as I can but am a bit confused with so many choices of turbos and housings etc. Cost is also a factor so unfortunately a ball bearing turbo is out for now. Thanks in advance Matt
Gary Evans		#1	[-]
Posts: 2263 (05/29/08 14:02:40) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	A ball bearing turbo is not necessary. My suggestion would be what I'm using which is a TD05 Super 16g. The .63 turbine may be a little large. 300hp is a stretch for stock injectors but 275 is reasonable. With enough fuel (larger injectors) and boost it is capable of 400. Mine comes on boost at 3000rpm and is at 10lbs by 5000.
hornog2		#2	[-]
Posts: 2 (05/29/08 17:44:50) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Thanks Gary, Is the super 16G a custom item or are they an off the shelf turbo? What are the specs on the super 16G? I have been looking but am finding limited info Also what size injectors would you recommend for reaching 400hp and do you need to run them as a secondary set or will they fit the stock mounts with a bigger fuel rail? Last Edited By: hornog2 05/29/08 23:07:51. Edited 2 times.
Gary Evans		#3	[-]
Posts: 2264 (05/30/08 04:48:02) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	The model is Mitsubishi TD05H-16G06. This map shows the compressor plot for a 1300cc motor. Standard as far as I know. You can get them through Hahn Race Craft as that is what they use for their Busa turbo kit. Honda S2000 automotive injectors are drop in. They are 36lb injectors as compared to the 26lb OEM's.
The Wuss		#4	[-]
Posts: 365 (05/30/08 17:15:59) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	The S-2000 injectors are good for about 380ish so far. - Last Edited By: The Wuss 06/02/08 03:01:19. Edited 1 times.
hornog2		#5	[-]
Posts: 3 (06/02/08 00:52:27) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	The TD0516G06 map looks alot like the TD05 big or large MAP, its very hard to find details on the Super 16G but the TD05 large was easy to find. Could the super, big and large be one and the same? See an overlay of the Map you posted Gary and the Map for the TD05H16G Large. Last Edited By: hornog2 06/02/08 01:07:03. Edited 1 times.
Gary Evans		#6	[-]
Posts: 2265 (06/02/08 04:38:15) Reply Quote More My Recent Posts Message Me Connection Blocking Invite Ignore User's Posts	Same thing!

<< Previous Topic Next Topic >>

Quick Reply